12 Nozzles negative pressure filling machine semi automatic rotary 12 heads water wine siphon bottle filling machine
Model:GP-SF12A
Filling nozzles qunatity: 12
Filling range: 50-3000ml
Bottle diameter:12-30mm
Bottle height:50-380mm(other size can be customized)
Production capacity:1000-3000 bottles / hour
Filling accuracy:±0.5%
Filling level error: ± 3mm
Bottle diameter: ≥12-30mm
Power: 0.55kw
Voltage:220v/380v 60Hz/50hz
Dimension : 1000×800×1500mm
Mainly used for soy sauce, vinegar, wine, pesticides and other easy to foam from the liquid.
Semi automatic negative pressure liquid quantitative filling machine is one of the company's new negative pressure series filling equipment. The product structure is reasonable, easy to operate, simple and economical to use, accurate filling, especially suitable for irrigation of easy foaming liquid such as wine, soy sauce and vinegar. Installed.
Model:GP-SF12A
Filling nozzles qunatity: 12
Filling range: 50-3000ml
Bottle diameter:12-30mm
Bottle height:50-380mm(other size can be customized)
Production capacity:1000-3000 bottles / hour
Filling accuracy:±0.5%
Filling level error: ± 3mm
Bottle diameter: ≥12-30mm
Power: 0.55kw
Voltage:220v/380v 60Hz/50hz
Dimension : 1000×800×1500mm
Operation, maintenance and installation
1. Because the filling machine is an automatic machine, the size of the easy-open bottle, bottle pad and cap is required to be uniform.
2. Before driving, you must first use the rocker to turn the machine to see if it is abnormal. It is true that you can drive again.
3. When adjusting the machine, the tool should be used properly. It is strictly forbidden to use excessive tools or excessive force to remove the parts to avoid damage to the machine or affect the performance of the machine.
4. When the machine is adjusted, tighten the loose screws and turn the machine with the rocker to see if the motion meets the requirements before driving.
5. The machine must be kept clean. It is strictly forbidden to have oil, liquid or glass debris on the machine to avoid damage to the machine. Therefore, it must:
(1) The machine removes the liquid or glass debris in time during the production process.
(2) Clean all parts of the machine surface before delivery, and add clean lubricating oil to each activity department.
(3) It should be scrubbed once a week, especially in places that are not easily cleaned in normal use or blown off with compressed air.
Disinfection and rinsing
1. Loosen the upper and lower set screws, remove the liquid injection system for overall disinfection, or disassemble separately for disinfection and cleaning.
2. Put the inlet tube in the cleaning solution to start cleaning.
3, 500ml models may have errors in the actual filling, the volume of the measuring cylinder before the formal filling.
4. Needle tube for filling machine, type 10 with standard 5ml or 10ml syringe, type 20 with 20ml glass filler, type 100 with 100ml glass filler.
Installation Precautions
1. After the machine is unpacked, first check whether the random technical data is complete, and whether the machine is damaged during transportation, so as to solve it in time.
2. Install and adjust the feeding assembly and the discharging assembly according to the outline drawing in this manual.
3. Add new lubricant to each lubrication point.
4. Rotate the machine with the rocker to check that the machine is running in the correct direction (in the counterclockwise direction of the motor shaft). The machine must be protected from grounding.
Package&Shipment:
