Automatic 6 cavity PET bottle blowing machine high speed water drinks bottle container blow molding making production line for 0.1-2L bottles
Model:GR-ABM06
Main machine:Maximum Bottle capacity:2000ml
Maximum bottle diameter:Φ106mm
Neck diameter:Φ18~38mm
Maximum bottle height under neck:<330mm
Maximum preform height under neck:<155mm
Clamping stroke:120mm
Bottom die stroke:50mm
Bottle pitch:114.3mm
Maximum output rate (bph):8,000(500ml water bottle) 7,200(1500ml water bottle)
Number of molds:6
Heating part:Number of heating modules:5
Number of heating lamps:10
Number of preform bases:100
Electric part:Voltage:220/380V
Frequency:50/60Hz
Service power:30~40kw/h
Installation power:110kw
Air source
(High pressure air consumption depends on PET bottle volume, altitude):Low pressure:1Mpa
Low pressure air consumption:2m3/min
High pressure:3.5Mpa
High pressure air consumption:8m3/min
Cooling water:Pressure?:2~4bar
Cooling water (≤18℃):Flux:9m3/h
Weight?:G.W.:Around 10 ton
Dimension:Main machine (L×W×H):5800×2600×2600mm /4000kg
Preform unscrambler(L×W×H):4500×3500×3500mm /550kg
High speed bottle blowing machine is used for PET water bottle, hot filling bottle, steam drink bottle, edible oil bottle, pesticide bottle and so on.
The blow moulding machine is suitable for the production of 0.1L-2.0L plastic containers and round and square bottles.
Fully automatic blow molding machine, freeing hands all the time, automatically adding preforms, automatic molding.
