Heat shrinkable tube inner hot melt gluing machine Heat shrinkable sleeve inner spiral gluing machine Heat shrinkable end cap inner gluing machine
Model:GR-G-T
Glue tank capacity: 10kg TANK Teflon is not carbonized
Motor power: 200W Motor power: 200W
Pump Pu: 15CC/planetary wheel
Frequency changer: 0.75KW Taian inverter
Operating temperature: up to 210°C
Overall power consumption: 4500W
Power demand: 220VAC/single phase
Melting capacity: 10kg/hr
Body weight: 48kg
Body size: 680x350x630mm
Hose length: 2/4/6/8/10/24Ft
Hose capacity: 3 groups
Features
The gear pump has a uniform spitting volume and no pressure drop. It can be used as a small amount of spitting and can be used for speed tracking spitting with a parallel inverter.
The gear pump is independently suspended, which is easy to maintain and repair, saving man-hours.
The pump accumulates large pressure, and the main machine can be operated with multiple sets of hoses and gun bodies.
To
10 feet/8 feet hot melt glue hose each
1 The inner tank adopts imported Teflon tube, which has good flexibility, anti-adhesion and high temperature resistance (up to 210 degrees), which can greatly reduce carbonization.
2The heater adopts American heating wire and high temperature resistant wire, evenly wound on the outer wall of the throat, with good insulation, uniform heat conduction, and high temperature resistance.
3Using high-quality insulation materials to ensure the insulation performance of the throat.
4 Good bending performance, folding resistance, relying on high-quality materials (continuous folding heating wire and high temperature resistance wire), reasonable processing technology design, and its maximum bending radius can reach 20cm
Two sets of hot melt glue gun and finger grips
1. Active air opening and spring closing design, the response speed is sensitive and reliable.
2. The built-in filter can reduce the malfunction caused by the blockage of the glue nozzle.
3. The nozzle is made of imported wear-resistant materials, treated with special technology, can be durable, and will not wear out for long-term use.
4. Reliable new sealing structure components to ensure stable operation and durability of the gun body.
5. It can carry out medium-low or high-speed intermittent and continuous glue spraying work, and can evenly apply glue on the substrate.
6. The fixture is made of Saigang CNC, which is durable, not easy to wear, and has high precision.
Mechanical transmission part
1 200W servo motor 1 (Taiwan Delta)
2 Speed-regulating motors 2 sets (Shanghai Oute)
3 Precision screw rod 2 (imported from Taiwan)
4 Synchronous round (imported from Taiwan)
5 Use imported transmission belt (imported)
6 Cylinder: 1 (Taiwan Qi Like)
7 Stainless steel hardened rod
8 40x40 square tube for frame, stainless steel plate, (paint treatment)
9 All accessories are made by precision machining, and the surface is treated with ironing.
To
Control section:
1. Proximity switch, 2 sets. (Keyence)
2. 2 sets of U-shaped photoelectric. (Keyence)
3. One PLC (Mitsubishi)
4. Relay (Omron)
5. Touch screen (Xinjie)
6. Power supply (EEU)
To
Equipment specific parameters:
Finger sleeve diameter: 20MM -60MM
Diameter of big round mouth: 60MM-120MM
Finger sleeve length: 10MM-100MM
Length of big round mouth: 20MM-300MM
Thread distance: 5MM
Finger cot specifications: 2 fingers, 3 fingers, 4 fingers (the finger cot distribution is required to be accurate)
Double station: One station is coated with a large round mouth, and the other station is coated with finger cots.
Efficiency: 2-4 pieces per minute for large round mouth stations Refers to 1-3 pieces per minute for sleeve stations
