Oral liquid solution ampoule filling machine small desktop glass dropper bottle vials quantitative chemical pharmacy lab filler equipment

Model:GP-Z10

Voltage: 220V

Power: 20W

Filling volume:0.2-10ml

Filling precision:≤± 0.5%

Weight:10kg

Size:220×230 ×380mm

Filling range(for your choice):5-20ml;5-30ml;10-100ml;30-250ml;50-500ml

Oral liquid solution ampoule filling machine single head Model:GP-Z10 is made of electric, crank, piston structure design of the quantitative liquid points installed, applicable to the department of pharmaceutical preparation in hospital, ampoules, eye drops, all kinds of oral liquid, shampoo and various kinds of liquid agent filling; At the same time the Factory wholesale syrup bottle vial oral liquid solution inserting filling machinery also can do all kinds of chemical analysis of the test of quantitative liquid continuous and fluid, can be applied to the large, medium, small pesticide factory, small liquid repacking, is small doses of quantitative liquid in repacking the ideal equipment.

Main Features

1. This Factory wholesale syrup bottle vial oral liquid solution inserting filling machinery is made of stainless steel manufacturing, innovative and beautiful modeling;

2. The structure of this Factory wholesale syrup bottle vial oral liquid solution inserting filling machinery is simple, reliable, low malfunction;

3. The cone piston, sealed performance is good, repacking fluid amount accurate, convenient adjustment of fluid volume;

4. Part of Factory wholesale syrup bottle vial oral liquid solution inserting filling machinery use activities connected,easy handling, can be sterilized points note;

5. Cylinder, push rod, the piston of Factory wholesale syrup bottle vial oral liquid solution inserting filling machinery uses stainless steel materials, corrosion resistance and wear resistance;

6. Continuous adjustable speed,the eye drop filling machine is easy to operate.

Model:GP-Z10

Voltage: 220V

Power: 20W

Filling volume:0.2-10ml

Filling precision:≤± 0.5%

Weight:10kg

Size:220×230 ×380mm

Other machine model for your option according to different filling volume and products:

1.Firstly the machine must be connected with the earth wire,then choose the standard syringe for filling according to different filling volume. Generally speaking the filling volume ranges from 0.2ml-1ml then adopts the 1ml syringe;

1ml-5ml the 5ml syringe; 5ml-10ml the 10ml syringe;20ml-100ml then the 20ml-100ml Intubation tubes adopted(as well the stainless steel filling system can be chosed from our factory); More than 500ml our factory offers the customized steel filling system.

2.Pull out the syringe core,then apply a nut with the syringe core(Note:10ml filling volume due to the big different in diameter of syringe,the gasket should be adopted thus),fix the base with the nut. Syringe tubes must be cleansed when disassembled.

3.Apply the upper lock ring for the filling mouth,then fix the nuts(Note: screw the nut in a slight way lest the outer tube be easy to break);

4.Integrate the syringe core and outer parts into the whole set so the filling system is finished assebly;

5.Mark the arrow for the valve upward then fix the screw;

6.Aligh the whole filling system with the upper and lower fixed rod,applied for the bearing and make the syringe filling system in level with the bearing surface; Never let the nut touch the crank handle of machine when assemling the lower part lest the crank gives off the

noise when turning ;The proper distance between the nut and crank is about 1mm; Fix the screws when finishing the assemly of filling systrem; Connect the valve and filling syringe with the short tube; Inlet tube for liquid inlet nozzle,outlet tube for outlet nozzle.Be care ofthe tangle of tubes during use of machine.

7.Poke the crank then the crank can turn freely;Otherwise the assemly will be in a wrong station.Please check if the syringe filling system is connected with the rolling bearing;

Application filling containers:

Final testing samples filled by our oral filling machine:

Accesorries of  liquid glass dropper bottle filing machine:

Packaging&delivery:

1. Before packaged& delivered, we will test the Semi automatic single head oral liquid filling machinery, oral solution filling machine seriously and guarantee the filling machine runs stably with high accuracy.

3. Air express, air freight, sea tranportation, can be provided by us.