Two individual control panels peristaltic gear pump filling machine with double heads oil e-liquid water essential oil juicy bottle tabletop filler machinery

Model:GP-A02D

Voltage:AC220V 50HZ /110V 60HZ

Filling Range:5-3200ml

Power:60W

Max Flow Rate:3.2 liter/min

Filling accuracy:within 1%

Size:530×360×210mm

Weight:28Kg

Filling Speed:20-60 times/min

Filling material:Honey,Liquid,Water,perfume,oil

1) The gear pump is drived by magnetic power, the pump head and the motor is connected without shaft. So there’s no need to worry about the burnout of the motor because of the high load of the pump.

2) Pump head and motor is imported from Japan, other components are manufactured in Taiwan, the function is steady and useful life is long.

3) Pumper head is made from 316L stainless steel, acid alkaline, corrosion-resistant.

4)The motor run is adjusted by potentiometer, the degree of accuracy of filling time can be lower to 0.01 second, so that can guarantee the filling accurately, the deviation is under 2%.

5) Filling capacity is from 5ml-3200L volume according to your need.

6) Fully functional, can be operated by hand, intermittent pedal filling, automatic intermittent filling. Intermittent time can be adjusted.

7) Widely applied in various industrious, almost can be used to filling any flow liquid, especially suitable for oil, washing fluid, acid base solution, High corrosion resistance liquid.

Filling bottling line,Capper,Sealer,Labeler,Packaging machinery

Widely used in cosmetic, drinks, medical, chemical, medical, food industry etc, highly improve production capacity and product quality. Ideal equipment to fill low viscosity liquid oil, perfume, juice, milk, beverage, ink, water in the bottle, jar and can

Model:GP-A02D

Voltage:AC220V 50HZ /110V 60HZ

Filling Range:5-3200ml

Power:60W

Max Flow Rate:3.2 liter/min

Filling accuracy:within 1%

Size:530×360×210mm

Weight:28Kg

Filling Speed:20-60 times/min

Filling bottling line,Capper,Sealer,Labeler,Packaging machinery

Operation steps:

A.turn on the filler

B: set the filing time depend on your bottle volume(adjust by the add button ) and set the filling speed.

C: adjust the waiting time depend on the gap time you need(adjust by the add button )

D: there are two models for the "counter, model one is: when the red light

is on, and the filler will work until the number you have set, that means, if you set 20, the filler will stop after filling 20 times. Model two is: the red light is off, the counter will record the filing times.

E:the decimal point can be moved by press the" " button.

F:settingt Use this button can let you set the filing range easily, press this button before flling, and the it will fill when you press that, and then wait the filing. when your bottle is full, then press that button again, then the filling range is been setted and the filler will remember this data and you can use for next flling

Filling bottling line,Capper,Sealer,Labeler,Packaging machinery

Control panel demonstration:

1. Parameter key; used to adjust the filling time, interval time and counting preset value, and the three LEDs on the left side of the panel correspond to the indication.

2. Cursor key; after selecting the parameter to be adjusted, the corresponding digital tube will flash when it is pressed, indicating that the value can be adjusted.

3. Adjust button; during the flashing of the digital tube, press the adjustment button, the number changes from 0---9, and each increment is 1

{The above three keys stop working for 4 seconds and the digital tube is not flashing}

4, time base button; in addition to the user can adjust the time range, you can also set the time base, there are two kinds of 0.1S and 0.01S, press the time base button to select, the decimal point shift indication, interval time base and filling time The time base is consistent;

5; Clear the key and clear the actual filling count value.

{The above five buttons are only valid when the controller has not started filling, and the following three buttons are valid at any time}

6, counting mode, selectable preset and cumulative two modes, when preset, when counting to the preset value, the counting indicator flashes, stop filling, press the {action mode} button at this moment will not fill, if the user To continue filling, you can switch to the cumulative counting mode or clear the actual counting value, and then press the {action mode} button to continue working. When the mode is accumulated, the counting will be incremented. When it is greater than 99999, it will be reversed. Can be switched at any time.

7, sports mode; can choose automatic, manual, set three modes;

Setting mode; its function is to help the user not know the exact filling time to help him initially set the filling time. When the user sets the filling flow, set the filling time as large as possible, then press the {action mode} button to start. Filling, the user monitors the filling device. When filling the required amount, press the {action mode} button again, the current time base and the actual filling time are automatically memorized as the time and time base for the subsequent filling. Count plus one.

Manual mode; each time the {action mode} key is counted from the filling to the time interval, it will automatically stop and count again. Press the {action mode} button again to start filling again.

Automatic mode; after pressing the action mode button, the controller will automatically fill according to the set parameters - delay - time - to - time to {count} - interval - delay - -time up. In Filling----Delay---Time to {Count}---Interval---Delay---Time to repeat one cycle after another until the count preset number is reached {if it is a preset Mode} or when the action mode button is pressed, the controller stops working.

8. Action mode button; start the controller when it stops, and stop when the controller works.

Filling bottling line,Capper,Sealer,Labeler,Packaging machinery

Two individual control panels peristaltic gear pump filling machine with double heads oil e-liquid water essential oil juicy bottle tabletop filler machinery

Model:GP-A02D

Voltage:AC220V 50HZ /110V 60HZ

Filling Range:5-3200ml

Power:60W

Max Flow Rate:3.2 liter/min

Filling accuracy:within 1%

Size:530×360×210mm

Weight:28Kg

Filling Speed:20-60 times/min

Filling bottling line,Capper,Sealer,Labeler,Packaging machinery

Filling material:Honey,Liquid,Water,perfume,oil

1,Adopting new potentiometer speed control, digital display, simple and intuitive operation, higher filling accuracy, deviation 0.5%;

2, Germany imported magnetic gear pump. Reliable quality, long service life, acid and alkali corrosion resistance;

3, stainless steel chassis, beautiful and exquisite. Durable.

4, small size, easy to operate

5, convenient cleaning and disinfection

6, full-featured, automatic manual, can be equipped with assembly line work

7, can be equipped with multiple filling heads. Commonly used models are [single pump, double pump and four pump;

8, can fill the vast majority of liquids, such as; a variety of pharmaceuticals, chemicals, oils, cosmetics, food and other non-particulate liquid;

9, 0.5ml to 4000ml adjustable, easy to adjust;

Machine details:

Filling bottling line,Capper,Sealer,Labeler,Packaging machinery

Application:

This electric magnetic pump liquid filling machine use microcomputer control technology,high filling accuracy and reliable performance,it is suitable for filling low viscosity liquid products,such as water, oil, e-juice, e-cigarette, essential oil, coconut oil ,perfume etc,widely applied to food,commodity,cosmetic,medicine,chemical industries etc.

Filling bottling line,Capper,Sealer,Labeler,Packaging machinery