Luer-Lock Syringe Filling Machine 1ml Pharmaceutical Prefilled Liquid Syringe Filling Sealing machine medical grade disposable empty syringe Hyaluronic Acid Gel filler line

Model:GR-PSF10

Filling volume:1-10ml (volume can be customized)

Production capacity:5-20 pieces/min (Depends on the consistency and loading of the gel)

Filling nozzle:1 piece (can be customized according to production speed)

Plugging nozzle:1 piece (can be customized according to production speed)

Filling accuracy:±1.5% - ±2% (filling paste gel)

Power:3.5kw

Air compressor:0.2-0.6 Mpa

Weight:600Kg

Size:2500x1350x1600

Automatic PFS Sterile Injectable Hyaluronic Acid filler Dermal Filler syringe filling capping machine for syringe filling is a pre-filler developed for laboratory filling prefilled syringes. Applicable to: filling and stoppering of 1-20ml glass syringe (ie BD tube).

Syringe filling machine function

With the dial wheel intermittently rotating, the syringe barrel is fed by a piece of the organizer and hung on the dial.

In the filling station: filling by the gel filling pump, the filling nozzle is sealed from the bottom to the upper part of the syringe and the pressure is filled. The piston movement of the filling pump is driven by the servo motor, the filling amount and the filling The loading speed can be set and adjusted on the touch screen.

In the capping station: the hat is conveyed by the shock plate to the lower side of the small nozzle of the syringe, and then the cap is driven upward by the cylinder. If it is a screw cap, the cap is first sucked by a cap and then sent to the cap. Inside the head, the cap is raised again, rotating while rising, and the cap is screwed onto the syringe head.

Discharge: The dial wheel rotates to the discharge station, and the syringe is pulled down from the dial by the discharge lever, and then the slide is slid down to collect (single slide down).

1.Filling by Ceramic turn valve pump control. The filling nozzle is sealed from the bottom to the top of the syringe and use pressure filling for high viscosity material like toothpaste , The piston movement of the filling pump is driven by the servo motor, and the filling amount and filling speed can be set and adjusted on the touch screen

2. The cover is sorted by the cap vibrating and sent to the insert capping station syringe, and then the capper is forwarded, and the vacuum capper to vacuum suction the cap and then moved up. Move back and forth, put the cap into the bottom of syringe

3. In the capping station: the hat is conveyed by the shock plate to the lower side of the small nozzle of the syringe, and then the cap is driven upward by the cylinder. If it is a screw cap, the cap is first sucked by a cap and then sent to the cap. Inside the head, the cap is raised again, rotating while rising, and the cap is screwed onto the syringe head.

Detail pictures:

1.All work stations and turn table

Included the syringe loading guider

Servo motor control filling

Automatic plugging and vacuum

Output finish product guider

Output syringe guider

After syringe finish filling and plugging, it will output along the guider automaticlly.

Pre filled syringe filling machine Filling system

Use servo motor drive Vertical up filling ,filling stroke controlled by servo motor, running stable

Pre filled syringe filling machine Vacuum plugging station

Vibrating plate will sort of the rubber plug automaticlly

And send plug into plugging station, Then plugging insert hear will insert it into syringe and vacuum at same time.

Pre filled syringe filling machine Plug unscraber vibrating plate

Used to sort of the plug then send to plug into plugging station one by one.

Touch screen operation

Use import Siemens touch screen operate machine

The touch screen can save multi-standard production programs. After replacing the specifications, you can directly call the corresponding program screen.

Pre filled syringe filling machine PLC programed

Use Import Germany Siemens PLC

All programed be programed by engineer before machine leave factory

3.Filling nozzle

The syringe is brought to the filling station by turn table and the single potting needle is inserted into the syringe and the filling side is raised. When filling, the syringe is sealed and vacuumed.

The filling pump, the filling needle, the stopper rod and the vacuum sealing body are all driven by independent servo motors, and all parameters can be set on the touch screen.

Model:GR-PSF10

Filling volume:1-10ml (volume can be customized)

Production capacity:5-20 pieces/min (Depends on the consistency and loading of the gel)

Filling nozzle:1 piece (can be customized according to production speed)

Plugging nozzle:1 piece (can be customized according to production speed)

Filling accuracy:±1.5% - ±2% (filling paste gel)

Power:3.5kw

Air compressor:0.2-0.6 Mpa

Weight:600Kg

Size:2500x1350x1600

Working process:

1. Manually insert the syringe from the slide into the filling dial: the syringe slides down the row of slides, the dial rotates intermittently, feeds the syringe one syringe at a time, and brings it to the corresponding work station (also can be used The automatic feeding mechanism is to manually install a honeycomb syringe at a time, and then automatically feed the machine, the cost is extra).

2.Syringe filling: The syringe is brought to the filling station by the dial wheel. The single needle is inserted into the syringe and the filling is raised. When filling, the syringe is sealed and vacuumed. The filling pump is filled with a ceramic pump.

3.Vacuum of the syringe plugging: The syringe after filling is rotated by the dial to the stoppering position. The rubber stopper is arranged by the oscillator and sent to the top of the syringe through the stopper rail. The stopper is first taken by the stopper rod. Upper, the plug rod and a vacuum body are integrated, while pressing down the syringe seal, vacuuming, and then adding the plug rod to the liquid level of the syringe.

4.Detachment of the finished product: The finished syringe after filling and squeezing can be collected by manual suspension after sliding through a slide.

Main Features

1)This machine is driven by a full servo motor and has no traditional mechanical transmission.

2) The machine is easy to operate and reliable.

3) Filling speed and finishing adjustment, vacuum and time of vacuuming can be adjusted, suitable for various viscosity oils, gel filling and stoppering.

4)The touch screen can save multi-standard production programs. After replacing the specifications, you can directly call the corresponding program screen.

5) The machine has a small footprint and is easy to move, making it ideal for laboratory or small batch production.